The Abadecom photoluminescent truncated beacon It is designed to guide, demarcate and mark out horizontal surfaces in dark or dimly lit areas, offering a robust, low-maintenance product made from 100% recycled and 100% recyclable plastic.
Fixation mode
The photoluminescent truncated marker is fixed to any paving or horizontal surface using fixing resin. A distance of 2.5 to 5 metres between markers is recommended, ideal for creating continuous and homogeneous guide lines on paths, roadways or access routes. Upon request, a screw can be inserted to increase grip to the ground in demanding environments.
Properties
- High exterior durability: resistance to the UV radiation and to ageing from prolonged exposure.
- Low maintenance: it does not splinter or rust
- Thermal and electrical insulator, e waterproof.
- inert material against environmental or chemical degradation, or putrefaction.
- Durable and retaining its shape, at the same time manageable and sturdy: ideal for urban and natural use.
- Eco-friendly and non-polluting recycled plastic, has a negative carbon footprint (-0 carbon footprint); not only is something new manufactured, but existing waste is reused.
Photoluminescence.
Luminescent devices are activated by sunlight or artificial light and are prepared to maintain performance against UV ageing. The photoluminescent part allows visibility in darkness or poorly lit areas.
- Photoluminescent charge: 10 minutes
- Glow duration: more than 12 hours in the dark
- Important: To appreciate the luminescence effect, no direct light should fall on the piece.
Technical information Photoluminescent part
- Brightness colour: Green
- Operating temperature range: -15ºC / 50ºC.
- Luminance after 10 minutes: Greater than 1,300 mcd/m²
- Luminance after 60 minutes: Greater than 190 mcd/m2
- UNE 23035 Luminance Decay Time (*): Greater than 26,600 minutes
(*) Logarithmic extrapolation in accordance with UNE 23035 until the time when the luminance is 0.3 mcd/m2 is obtained.
The technical data shown are the result of laboratory tests.
Dimensions of the truncated cylinder
- Height: 65 mm.
- Diameter of the photoluminescent part: 67 mm.
- Front cylinder bore: 87 mm.
- Width: 86 mm.
- Base: 125 mm.
Recycled plastic base: finishes, aesthetics and strength
Recycled 100% material and recyclable 100% material, with a very realistic imitation of the natural colour, integrating itself excellently into urban and natural environments.
Colours available: Brown / Black / Terracotta / Green / Natural grey / White (subject to availability).
Key advantages:
- Anti-graffiti and anti-vandalism, hygienic and easy to clean.
- Animal and insect resistant.
- Very high durability and great versatility of use.
Recommended apps
Perfect for sustainable signage and buoyage in:
- Gardens, tourist routes and archaeological sites.
- Astrotourism routes (free from electrical light pollution).
- Paths, greenways and natural parks.
- Cycle lanes, running paths, viewpoints.
- Rural car parks and poorly lit access routes.