Solar LED road studs

The Abadecom LED solar road studs they provide a clear luminous guide on road edges, roundabouts, junctions and hazard spots, without the need for an electrical grid connection. They are charged by solar energy and activate automatically at dusk to reinforce road markings and reduce driver uncertainty in low-visibility conditions. Available in various configurations (colours, modes and formats), they are a robust solution for projects in road safety, civil engineering and urban mobility.

• Extended battery life after full charge (depending on model).
• High nighttime visibility and directional guidance at critical points.
• IP external protection and road-use resistance.
• Quick installation (without electrical conduit).
• LED models and colours according to road type and warning objective.

Scope 

• Roundabouts and drainage channels.
• Crossroads, slip roads and forks.
• Kerbs and narrowing zones.
• Low-visibility stretches (fog/rain, bends, crests).

Installation procedure (With epoxy adhesive)

• Check that the solar panel charges and discharges normally.
• Identify the location for the installation.
• Clean the path surfaces.
• Clean the underside of the solar road stud and use epoxy glue to stick it to the ground.Depending on the model)
• Wait 8 hours for it to dry before turning on the solar road stud.

Installation procedure (Bolted to the floor)

• Check whether the solar road stud charges and discharges normally.    
• Identify the location for the installation.
• Clean the path surfaces.
• Drill the hole.Depending on the model)
• Place the solar road stud in the installation position and tighten the screw.
• Lay the cement to fix the road stud.

Warranty

The LED Solar Road Studs have a 2-year guarantee.

Technical specifications by model