LED CAT EYE  ROAD PHOTOLUMINISCENT

Field application

Photoluminescent model CF-R-191 is suitable for normal low-speed roads, especially roads without street lamps, such as villages and scenic places.

According to the actual road conditions, a single continuous product or multiple combined products can be selected to be installed on the road pavement either on one or both sides.

At night, its reflective function provides motor vehicle drivers with guidance instructions.

The auto-illumination function provides guidance instructions to drivers of non-motorized vehicles and pedestrians traveling at night. In this way, it greatly improves road safety at night.

Technical specifications

  • Dimensions: 112 x 94 x 22 mm
  • Dimensions of the photoluminescent piece: 42 x 74 mm
  • Suitable for outdoor
  • The photoluminescent piece is activated with sunlight or artificial light.
  • The dimming time of the photoluminescent piece once the piece is charged, is up to 12 hours in conditions of absolute darkness
  • Bright green color of the photoluminescent piece
  • High gloss reflective film favouring visibility when the light of the vehicles falls on them
  • Reflector color: White, yellow
  • PMMA base and white ABS
  • Self-cleaning
  • Stainless
  • Corrosion, abrasion and shock resistance

To be considered

In order that the effect of the luminescence can be appreciated, no light has to strike directly on the piece.

Reflective piece measurements

8 x 2 cm rectangular piece.

Fixing method

It is fixed in any object, using epoxy fixing resin / glue and / or screwed.

Descargar FICHA TÉCNICA

Field of application

The CF-R-192 photoluminescent model with PMMA base (Polymethylmethacrylate) and ABS (Acrylonitrile Butadinene Styrene) base and with high intensity reflectors, is suitable for normal low speed roads, especially roads without lighting, since its main function is to mark and signal areas without lighting, as well as bicycle lanes, tourist routes, paths for running, walkways for pedestrians and motor vehicles.

According to the actual road conditions, a single continuous product or multiple combined products can be selected to be installed on the road pavement either on one or both sides.

At night, its reflective function provides motor vehicle drivers with guidance instructions.

The auto-illumination function provides guidance instructions to drivers of non-motorized vehicles and pedestrians traveling at night. In this way, it greatly improves road safety at night.

Technical specifications

  • Dimensions: 105 x 96 x 21 mm.
  • Dimensions of the photoluminescent piece: 65 x 70 mm.
  • Suitable for outdoors.
  • The photoluminescent piece is activated with sunlight or artificial light.
  • The dimming time of the photoluminescent piece once the piece is loaded is up to 12 hours in conditions of absolute darkness.
  • Green brightness of the photoluminescent piece.
  • High intensity reflective favouring visibility when the light of the vehicles falls on them.
  • Self-cleaning.
  • Resistance to corrosion, abrasion and shock.
  • PMMA base and white ABS.

Must take into account

In order that the effect of the luminescence can be appreciated, no light has to strike directly on the piece.

Reflector Features:

Dimensions rectangular piece: 74.7 x 13.9 mm rectangular piece

Colors: White and Yellow

Material: Plastic and reflective with 43 glass elements

Reflectance: High intensity (excellent night visibility)

Fixing method

It is fixed in any parameter, using epoxy fixing resin / glue and / or screwed.

Descargar FICHA TÉCNICA

Field of application

The CF-R-193 photoluminescent model with PMMA (Polymethylmethacrylate) and ABS (Acrylonitrile Butadinene Styrene) base and with high intensity reflectors, is suitable for normal low-speed roads, especially roads without lanterns, since its main function is to mark and signal areas without lighting, as well as bicycle lanes, tourist routes, paths for running, walkways for pedestrians and motor vehicles.

According to the actual road conditions, a single continuous product or multiple combined products can be selected to be installed on the road pavement either on one or both sides.

At night, its reflective function provides motor vehicle drivers with guidance instructions.

The auto-illumination function provides guidance instructions to drivers of non-motorized vehicles and pedestrians traveling at night. In this way, it greatly improves road safety at night.

Technical specifications

  • Dimensions: 100 x 96 x 21 mm
  • Dimensions of the photoluminescent piece: 65 x 70 mm
  • Suitable for outdoor.
  • The photoluminescent piece is activated with sunlight or artificial light.
  • The dimming time of the photoluminescent piece once the piece is loaded is up to 12 hours in conditions of absolute darkness.
  • Bright green color of the photoluminescent piece.
  • High intensity reflective favouring visibility when the light of the vehicles falls on them.
  • Self-cleaning.
  • It has a handle at the bottom for better adhesion to the road.
  • Corrosion, abrasion and shock resistance.
  • PMMA Base and White ABS.

Must take into account

In order that the effect of the luminescence can be appreciated, no light has to strike directly on the piece.

Reflector Features:

Dimensions: 74.7 x 13.9 mm rectangular piece.

Colors: White and Yellow.

Material: Plastic and reflective with 43 glass elements.

Reflectance: High intensity (excellent night visibility).

Fixing method

It is fixed in any parameter, using epoxy fixing resin / glue and / or screwed.

Descargar FICHA TÉCNICA

Field of application

The CF-R-194 photoluminescent model with PMMA (Polymethylmethacrylate) and ABS (Acrylonitrile Butadinene Styrene) base and with high intensity reflectors, is suitable for normal low-speed roads, especially roads without street lamps, since its main function is to mark and signal areas without lighting, as well as bicycle lanes, tourist routes, paths for running, walkways for pedestrians and motor vehicles.

According to the actual road conditions, a single continuous product or multiple combined products can be selected to be installed on the road pavement either on one or both sides.

At night, its reflective function provides motor vehicle drivers with guidance instructions.

The auto-illumination function provides guidance instructions to drivers of non-motorized vehicles and pedestrians traveling at night. In this way, it greatly improves road safety at night.

Technical specifications

  • Dimensions: 100 x 96 x 21 mm
  • Dimensions of the photoluminescent piece: 50 x 60 mm
  • Suitable for outdoors.
  • The photoluminescent part is activated with sunlight or artificial light.
  • The dimming time of the photoluminescent piece once the piece is loaded is up to 12 hours in conditions of absolute darkness.
  • Green brightness of the photoluminescent piece.
  • High intensity reflective favoring visibility when the light of the vehicles falls on them.
  • Self-cleaning.
  • It has a handle at the bottom for better adhesion to the road.
  • Resistance to corrosion, abrasion and shock.
  • White PMMA and ABS base.

Must take into account

In order that the effect of the luminescence can be appreciated, no light has to strike directly on the piece.

Reflector Features:

Dimensions: 74.7 x 13.9 mm rectangular piece.

Colors: White and Yellow.

Material: Plastic and reflective 43 glass elements.

Reflectance: High intensity (excellent night visibility).

Fixing method

It is fixed in any parameter, using epoxy fixing resin / glue and / or screwed.

Descargar FICHA TÉCNICA